• Indonesia
  • English

Selamat Datang, Terus Belanja dan dapatkan berbagai promo menarik di toko kami

Mini Usb Blaster Cable ALTERA CPLD FPGA NIOS JTAG Altera Programmer

Beli Produk

Tidak Tersedia

Tidak Tersedia


1. Support 1.5V,1.8V,2.5V,3.5V and 5.0V.

2. Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1, EPCS4, EPCS16)

---- Now we have tested chip using this tool is: Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS(EPCS1, EPCS4, EPCS16) ; EPC(EPC1, EPC4)

3. Support AS, PS and JTAG program ( with Verify and BankCheck function) .

---- When we tested the chip above , we use the different program mode: JTAG ( Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000 and Max3000) ; AS ( EPCS1, EPCS4, EPCS16 ) ; PS ( Stratix , Stratix GX )

4. Support embedded logic analyzer function of SignalTapII

5. Support NIOS II communication and debugger -- When you use it to debug your Black Gold , it will not Pop-up warning

6. Faster -- about 6 times than ByteblasterII

7. USB interface ! -- you don't need a PC with serial port now

8. 100% compatible with Official ALTERA USB Blaster

Packing List
1, USB cable one
2,10 core JTAG data line 1
3, USB-Blaster driver installation instructions